DTH hammers
Hammer size, shank system and operating pressure are reviewed together with the compressor and required hole.
Request this configurationDTH hammers and bits
DTH hammers and bits for hard-rock drilling.
Review the hammer, bit, shank, compressor and drill string as one system before confirming the configuration.
Hammer and bit matching · shank review · compressor compatibility
Product configuration illustration
Rock conditionHardness, fracture, abrasiveness and water conditions.
Hammer systemSize, shank, pressure range and connection compatibility.
Air supplyCompressor pressure, flow and operating altitude.
Hole targetDiameter, depth, penetration and service requirement.
Product range
A matched down-the-hole drilling system.
The hammer and bit must be considered together with air supply, connection and formation.
DTH button bits
Face design, button shape, diameter and shank are selected around rock condition and hammer compatibility.
Request this configurationHammer, bit and connection package
The tool string can be reviewed as one operating system to reduce avoidable compatibility errors.
Request this configurationExample catalog framework
DTH systems organized as complete drilling combinations.
Select the hammer, shank, bit face, operating pressure and drill string as one system. These sample entries demonstrate the final catalog structure.
01Hammer size and pressure
02Shank and bit face
03Air supply and hole target
Draft catalog preview.
These examples keep the page complete while the new Shopify product records remain unpublished. Product data will replace them automatically at launch.
3-Inch Standard DTH Hammer
Example hole class: 85–105 mm
Sample compact hammer for customers comparing entry-level DTH hole sizes and compressor demand.
View product
4-Inch Water-Well Hammer
Example hole class: 105–130 mm
Illustrative water-well hammer page entry with room for shank, connection and pressure data.
View product
5-Inch General-Purpose Hammer
Example hole class: 130–152 mm
General-purpose sample for quarry, water-well and civil drilling discussions.
View product
6-Inch High-Pressure Hammer
Example hole class: 152–203 mm
Example high-pressure configuration where air delivery and penetration targets must be matched.
View product
8-Inch Heavy-Duty Hammer
Example hole class: 203–305 mm
Large-format sample requiring rig capacity, air volume and drill-string review.
View product
Reverse-Circulation Hammer
Sample recovery and cyclone interface review
Sample RC hammer entry organized around sample recovery, pipe system and operating depth.
View product
Flat-Face Button Bit
Shank, diameter and button grade required
Illustrative flat-face bit for stable engagement in competent formations.
View product
Convex-Face Button Bit
Face profile selected after formation review
Sample convex profile for customers prioritizing penetration in fractured or mixed ground.
View product
Concave-Face Button Bit
Gauge design and flushing reviewed per job
Illustrative concave profile balancing guidance, cleaning and gauge support.
View product
Drop-Center Button Bit
Sample profile for straighter hole initiation
Sample drop-center face for applications where hole guidance is an important selection factor.
View product
Large-Diameter Button Bit
Air demand and rig pullback must be confirmed
Example large-diameter bit requiring hammer, compressor and rig capacity confirmation.
View product
Casing Advancement Assembly
Pilot bit, ring bit and casing size required
Sample overburden assembly combining pilot, ring, casing and connection information.
View productInformation for selection
Confirm the system before confirming the price.
These four details narrow the compatible hammer and bit options.
Rock condition
Hardness, fracture condition, abrasiveness and expected water inflow.
Hole requirement
Diameter, depth, inclination and expected penetration target.
Air system
Compressor pressure and flow, drilling altitude and available air package.
Hammer and shank
Existing hammer model, shank type, thread and drill string connection.
Applications
DTH systems for hard-rock drilling conditions.
Hard-rock water wells
Air drilling systems for water well and geothermal projects in competent rock.
Mining and quarry drilling
Production, blast-hole and supporting drilling applications reviewed by operating conditions.
Foundation and engineering
Anchoring, construction and site work requiring a matched down-the-hole system.
Technical reading
Prepare the details that affect compatibility.
Match hammer, bit and compressor
Check hole size, shank, pressure, air flow and formation as one system.
Read article →DTH face and button shape
Prepare the rock and flushing information needed to discuss bit geometry.
Read article →Hard-rock water-well application
Connect the DTH system with the rig, casing plan and hole target.
View application →Comparable evidence
DTH field records are being prepared.
Until a comparable case is published, send the rock, hole and compressor information for direct review.
Match the DTH hammer, bit and compressor before quotation.
Send the rock condition, hole diameter, depth, compressor pressure and flow, rig and existing shank system.